PP Bottle Filling and Aluminum Foil Sealing Machine
PP bottle filling and aluminum foil sealing machine with negative-pressure filling, automatic foil lid forming and heat sealing for milk, juice and soy milk.
What is a PP bottle filling and aluminum foil sealing machine?
A PP bottle filling and aluminum foil sealing machine fills milk, dairy products, soy milk and juice into PP or HDPE bottles under negative pressure, then forms the aluminum foil lid, caps it when required and heat-seals it under vacuum in one rotary unit. Reduced air exposure plus 304 stainless-steel contact parts and a 316 stainless-steel milk valve protect product quality. The machine suits small and medium-sized milk, juice and tea production facilities.
2,000–10,000 BPH
Detailed machine views for buyer verification
A detail page should show enough visual proof for buyers to inspect frame, filling area, capping system and operator-facing design.
PP Bottle Filling and Aluminum Foil Sealing Machine specification checklist
Use the table as an inquiry guide. Exact configuration depends on your product, container, capacity and line integration.
| Container | PP / HDPE bottle |
|---|---|
| Bottle Height | 150–310 mm |
| Bottle Diameter | Φ50–Φ90 mm |
| Filling Volume | 200–1,500 ml |
| Filling Method | Negative pressure filling |
| Sealing | Aluminum foil electric heat sealing; screw capping optional |
| Capacity | 2,000–10,000 BPH by model |
| Control | PLC + temperature monitoring + pneumatic actuation |
| Material | 304 stainless-steel contact parts; 316 stainless-steel milk valve |
| Models | XGFL12-12-9-1 / XGFL18-18-14-2 / XGFL24-24-18-2 |
Core assemblies buyers should review
vacuum filling limits milk air contact
forms aluminum foil lids on machine
seals foil under vacuum conditions
capping alternative to foil sealing
plc, electronics and thermal monitoring
304 contact parts, 316 milk valve
maximizes foil utilization and savings
How to configure a PP bottle filling and aluminum foil sealing machine project
PP or HDPE bottles are fed into the rotary filling unit.
Product is filled under negative pressure to minimize air exposure.
Aluminum foil lids are produced automatically on the machine.
Foil is sealed by electric heat sealing under vacuum.
Screw capping is applied instead when the optional capping unit is fitted.
Sealed bottles are discharged for downstream handling.
Video and case modules for this detail page
Australia Chemical Case Packing Machine
An automatic case erecting, bottle packing and carton sealing system developed for an Australian chemical liquid project. The SS316 system handles 5L HDPE bottles and completes carton forming, bottle loading and case sealing at 14 cases per minute.
High-Speed OPP Labeling Machine
A high-speed rotary OPP hot melt glue labeling machine for 500ml PET water bottles.
PET Bottle Blowing Machine
A six-cavity automatic PET bottle blowing machine for producing 500ml beverage bottles at 8,000 BPH.
Related machines for your project
Hot Fill Juice Filling Machine
Hot fill juice filling machine filling juice at 85–92°C into PET or glass bottles, capacity 2,000–18,000 BPH, with product-heat sterilization.
Ultra Clean Filling Machine
Ultra-clean (aseptic) juice filling machine filling UHT-treated product in a sterile chamber, capacity 2,000–16,000 BPH, for sensitive and low-acid juice.
PP Bottle Filling and Aluminum Foil Sealing Machine FAQ
What is included in a complete bottling line?
A complete line can include water treatment, bottle blowing, air conveyor, rinsing, filling, capping, inspection, labelling, shrink packing, carton packing, conveying and palletizing.
Why choose Modern Machinery as a filling machine supplier?
Modern Machinery combines filling machine manufacturing, customized line configuration, factory capability, quality control, service response, warranty and project support for international buyers.
What happens after I submit the inquiry form?
A project engineer reviews your requirements and replies within one working day with initial questions, machine scope suggestions and next steps for project discussion.
Can I get a FAT video for my own bottle and product?
Yes. After confirming bottle drawing, product type and target capacity, a matched machine test can be arranged and recorded before shipment.
Can this line run multiple bottle sizes?
Yes. The final configuration depends on bottle drawings, cap size, label type and required changeover speed. Change parts are available for different bottle formats.
What is the difference between isobaric and gravity filling?
Isobaric filling pressurizes the bottle to match the filler bowl pressure before filling, which prevents CO2 breakout and foaming. Gravity filling cannot handle carbonated products because the pressure drop causes the CO2 to escape violently.
Can this machine fill carbonated drinks into glass bottles?
Yes. It is designed for carbonated soft drinks such as soda, cola and sparkling beverages in glass bottles, using pressure filling technology.
How do I choose between gravity filling, hot filling and isobaric filling?
Gravity is for still water. Hot filling uses recirculation for juices. Isobaric filling is mandatory for carbonated drinks and beer to prevent gas loss.
Can Modern Machinery provide a customized bottling line solution?
Yes. The company can plan solutions based on liquid type, bottle or can format, target capacity, factory layout and packing requirements.
Does the video show a filler only or a full line?
This video focuses on the filling machine. A complete line adds labeling, packing, water treatment, blending and carbonation depending on the project.
Does the customer need bottle blowing in the same line?
For PET water projects, integrating bottle blowing can reduce bottle logistics and improve line flow when factory space allows it.
What information is needed for a glass bottle filling machine quote?
Provide bottle volume, bottle diameter, bottle height, cap type, target output, beverage type, voltage and whether you need upstream washing or downstream packing.
Can one machine fill both PET and glass bottles?
Some models support quick changeover between PET and glass, but the neck-handling system and capping heads need to be configured for both. We recommend specifying your bottle types upfront so we can supply the right change parts.
Can I talk to an engineer directly?
Yes. After the initial email exchange, a project engineer can connect by WhatsApp, phone or video meeting to discuss machine scope, layout and project details.
What is the typical lead time for a CSD line?
Standard configurations ship in 45-60 days. Custom or high-capacity lines may take 75-90 days for manufacturing plus 15-30 days for sea freight depending on the destination port.
Is glass bottle filling different from PET bottle filling?
Yes. Glass bottles are heavier and often require different bottle handling, guide rails, cap options and infeed/outfeed protection.
What quality support is available before shipment?
Quality support can include manufacturing inspection, machine running test, FAT records, photos, videos and shipment checks.
Can Modern Machinery plan a line layout for my bottle size and capacity?
Yes. Modern Machinery provides customized 2D and 3D plant layout planning tailored to facility dimensions, container type and target BPH.
Do you provide plant layout and machine list before ordering?
Yes. After confirming product, container, capacity and factory dimensions, Modern Machinery can prepare a preliminary layout direction, machine list and budget range for purchasing review.
What should be prepared before installation?
Factory floor plan, power supply, compressed air, water treatment interface, drainage and operator access should be confirmed before shipment.
What capacity does this machine support?
The test reference is 8,000-12,000 BPH; the final speed depends on bottle size, cap type and product.
What after-sales service is provided?
Service can include installation support, maintenance guidance, spare parts support, timely response and warranty service depending on project scope.
Do you provide installation and training?
Yes, our engineers travel to your site for mechanical installation, electrical commissioning, operator training, and production trial runs. We also offer remote video support for ongoing troubleshooting.
What information should I prepare before requesting a quote?
Please prepare your liquid type, packaging vessel, expected BPH, bottle or can size, factory dimensions and local voltage standard.
Can Modern Machinery provide a similar layout?
Yes. A similar project plan can be prepared after the buyer shares product type, bottle size, target capacity and factory dimensions.
Can I visit the factory or see a running line?
Factory visits are welcome. Running line videos and project case references are also available to help you evaluate machine quality and project execution before visiting.
Can this machine be part of a complete carbonated drink line?
Yes. It can be integrated with water treatment, syrup mixing, carbonation, bottle washing, labeling, packing and conveying systems.
Can the line be upgraded later when output increases?
Yes. Modular line planning allows future upstream and downstream upgrades.
What about spare parts availability?
We maintain a comprehensive spare parts inventory and ship express worldwide. Each machine comes with a recommended 12-month spare parts list, and we can also prepare custom spare parts packages based on your production volume.