 |
| Quantity: | |
|---|---|
We supply complete solution of beer bottling and packing equipment from A to Z, which includs Automatic bottle rinsing filling capping machine, Beer Pasteurization Tunnel, Air dryer, Automatic labeling machine, Automatic carton packing machine and the whole factory conveyor system.
Product Description:
This 3 in 1 Beer Bottling Machine - Wash-filling-capping 3-in-1unit is used to produce PET bottled beer with plastic screw cap. The PXGFD-B series of 3 in 1 monobloc rinsing, isobaric pressure filling, capping machine adopts advanced technologies of evacuation before filling and high pressure hot water injection system after Beer filling. These technologies remarkably reduce oxygen content in bottle beer, improve taste of beer much. They have been widely used in PET bottle beer filling equipment technology in the world.
Beer Bottle Filling Principle
Features:
1. Using the conveyor sent access and move wheel in the bottle directly connected technology; canceled screw and conveyor chains, this enable the change the bottle-shaped become easier.
2. Bottles transmission adopt clip bottle neck technology, bottle-shaped transform not need to adjust the equipment level, only change related the curved plate, wheel and nylon parts is enough.
3. The specially designed stainless steel bottle washing machine clip is solid and durable, no touch with the screw location of bottle mouth to avoid secondary pollution.
4. High-speed isobaric pressure flow valve filling valve, filling fast, filling accurate and no liquid spit out.
5. Spiraling decline when output bottle, transform bottle shape no need to adjust the height of conveyor chains.
6. Host adopt advanced PLC automatic control technology, the key electrical components from famous company such as Japan's Mitsubishi, and France Schneider.
7. The CIP cleaning solution gets in contact with every part and interstice of the valves.
8. With Central greasing system.
9. Replacement valves are adopted. The complete bottling process will be as below:
①, The replacement valve is linking with air drum, CO2 inside air drum enter bottles via replacement valve. The gas inside bottle now is mixing with CO2 and air.
②, Air exhausting ③valve is opened via cam to exhaust the mixed gas.
, Refill CO2 into bottle again.
④, Operation valve open, after the pressure between cylinder and bottle is equal, the filling process starts, when the filling level reach air returning pipe, filling stops, filling valves closed.
⑤, After bottling process finishing, before filling valves leaving bottles, air exhausting valve exhaust extra gas, then filling valves leave bottle neck, bottling process finishes.
Bottle Rinsing Part:
The top-chain conveyor is directly connected with infeed screw
High speed line adopts bottle clamps to transfer the bottle. It makes work much easier when bottle size is changed.
The rotary wheel is a fully SUS304/SUS316 stainless steel welded structure.
The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, Made of SUS304/SUS316 stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine frame via gear transmission.
Bottle Filling part:
Rotary wheel fully made of stainless steel SUS 304/SUS316.
Isobaric pressure filling method.
Filling valves are made of SUS304/SUS316.
Filling valves are reasonably structured with accurate filling.
Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-bottom.
Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in star wheel.
Bottle Capping part:
Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
All 304/316 stainless steel construction
No bottle no capping
Automatic stop when lack of bottle
Capping effect is stable and reliable ,Defective rate ≤0.2% .
Parameter:
Model | Production capacity | Rinsing heads | Filling heads | Screw Capping heads | Bottle size | Main motor power (KW) | |
Diameter (mm) | Height (mm) | ||||||
PXGFD-B 12-12-4 | 1000-1500 | 12 | 12 | 4 | 30-90
| 100-320 | 2.2 |
PXGFD-B 18-18-6 | 2000-2500 | 18 | 18 | 6 | 30-90 | 100-320 | 3 |
PXGFD-B 24-24-8 | 3000-4000 | 24 | 24 | 8 | 30-90
| 100-320 | 4 |
PXGFD-B 32-32-10 | 5000-6500 | 32 | 32 | 10 | 30-90 | 100-320 | 5 |
PXGFD-B 40-40-12 | 7000-8500 | 40 | 40 | 12 | 30-90 | 100-320 | 6.5 |
PXGFD-B 60-60-12 | 12000-15000 | 60 | 60 | 15 | 30-90 | 100-320 | 7.5 |
Service
MODERN MACHINERYoffers engineer to assist you in installing your bottling machine. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.
Our engineer offers the following services:
1. Installation of equipment or packaging line at the customer's plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment's performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures
Filling machine machining center
Container loading and shipping
We supply complete solution of beer bottling and packing equipment from A to Z, which includs Automatic bottle rinsing filling capping machine, Beer Pasteurization Tunnel, Air dryer, Automatic labeling machine, Automatic carton packing machine and the whole factory conveyor system.
Product Description:
This 3 in 1 Beer Bottling Machine - Wash-filling-capping 3-in-1unit is used to produce PET bottled beer with plastic screw cap. The PXGFD-B series of 3 in 1 monobloc rinsing, isobaric pressure filling, capping machine adopts advanced technologies of evacuation before filling and high pressure hot water injection system after Beer filling. These technologies remarkably reduce oxygen content in bottle beer, improve taste of beer much. They have been widely used in PET bottle beer filling equipment technology in the world.
Beer Bottle Filling Principle
Features:
1. Using the conveyor sent access and move wheel in the bottle directly connected technology; canceled screw and conveyor chains, this enable the change the bottle-shaped become easier.
2. Bottles transmission adopt clip bottle neck technology, bottle-shaped transform not need to adjust the equipment level, only change related the curved plate, wheel and nylon parts is enough.
3. The specially designed stainless steel bottle washing machine clip is solid and durable, no touch with the screw location of bottle mouth to avoid secondary pollution.
4. High-speed isobaric pressure flow valve filling valve, filling fast, filling accurate and no liquid spit out.
5. Spiraling decline when output bottle, transform bottle shape no need to adjust the height of conveyor chains.
6. Host adopt advanced PLC automatic control technology, the key electrical components from famous company such as Japan's Mitsubishi, and France Schneider.
7. The CIP cleaning solution gets in contact with every part and interstice of the valves.
8. With Central greasing system.
9. Replacement valves are adopted. The complete bottling process will be as below:
①, The replacement valve is linking with air drum, CO2 inside air drum enter bottles via replacement valve. The gas inside bottle now is mixing with CO2 and air.
②, Air exhausting ③valve is opened via cam to exhaust the mixed gas.
, Refill CO2 into bottle again.
④, Operation valve open, after the pressure between cylinder and bottle is equal, the filling process starts, when the filling level reach air returning pipe, filling stops, filling valves closed.
⑤, After bottling process finishing, before filling valves leaving bottles, air exhausting valve exhaust extra gas, then filling valves leave bottle neck, bottling process finishes.
Bottle Rinsing Part:
The top-chain conveyor is directly connected with infeed screw
High speed line adopts bottle clamps to transfer the bottle. It makes work much easier when bottle size is changed.
The rotary wheel is a fully SUS304/SUS316 stainless steel welded structure.
The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, Made of SUS304/SUS316 stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine frame via gear transmission.
Bottle Filling part:
Rotary wheel fully made of stainless steel SUS 304/SUS316.
Isobaric pressure filling method.
Filling valves are made of SUS304/SUS316.
Filling valves are reasonably structured with accurate filling.
Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-bottom.
Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in star wheel.
Bottle Capping part:
Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
All 304/316 stainless steel construction
No bottle no capping
Automatic stop when lack of bottle
Capping effect is stable and reliable ,Defective rate ≤0.2% .
Parameter:
Model | Production capacity | Rinsing heads | Filling heads | Screw Capping heads | Bottle size | Main motor power (KW) | |
Diameter (mm) | Height (mm) | ||||||
PXGFD-B 12-12-4 | 1000-1500 | 12 | 12 | 4 | 30-90
| 100-320 | 2.2 |
PXGFD-B 18-18-6 | 2000-2500 | 18 | 18 | 6 | 30-90 | 100-320 | 3 |
PXGFD-B 24-24-8 | 3000-4000 | 24 | 24 | 8 | 30-90
| 100-320 | 4 |
PXGFD-B 32-32-10 | 5000-6500 | 32 | 32 | 10 | 30-90 | 100-320 | 5 |
PXGFD-B 40-40-12 | 7000-8500 | 40 | 40 | 12 | 30-90 | 100-320 | 6.5 |
PXGFD-B 60-60-12 | 12000-15000 | 60 | 60 | 15 | 30-90 | 100-320 | 7.5 |
Service
MODERN MACHINERYoffers engineer to assist you in installing your bottling machine. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.
Our engineer offers the following services:
1. Installation of equipment or packaging line at the customer's plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment's performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures
Filling machine machining center
Container loading and shipping
