We supply complete solution of filling and packing line from A to Z, which includs Auto can / bottle depalletizing machine, Can / bottle rinsing device, 2in1 filling and sealing machine, Can wraming tunnel / Beer pasteurization tunnel, Air dryer, Automatic bottle packaging machine, Automatic palletizer system, as well as the complete Water treatment system, Mixing tanks, Water chiller, Beverage carbonator and the whole factory conveyor system.
This Beer Pasteurization Tunnel has 5-7 temperature sections, so temperature difference between section is small. It could assure good sterilizing, effects, reduce bottle broken rate. Hot water is recycled to use in temperature sections in order to save heat energy and reduce water consumption. This tunnel pasteurizer could process bottled beverage or beer products, which completely conforms to relevant technologic requirements.
On request, customized size can be studied to best fit your brewery spaces. All the tunnels are made of 304 stainless steel. Inside the pasteurizer, the bottles / cans are moved along the line, encountering the upper showers that spray them with heated water at different temperatures, until reaching the exit. The speed of the machine can be set and controlled from an electrical panel.
Performance characteristics:
1. Equipment rack is full stainless steel, the overall structure is compact, and health appearance.
2. High quality stainless steel mesh belt chain plate, can be long-term work under the high temperature of 100 ℃.
3. Solid cone wide-angle spray nozzle, the flow distribution uniformly stable, constant temperature field.
4. A variety of comprehensive utilization of heat energy recovery technology, energy saving, environmental protection.
5. Pt100 temperature sensor, measurement accuracy is high, up to + / - 0.5 ℃.
6. The combined process, reasonable process, can handle a variety of materials.
7. Sterilization temperature PLC touch screen control was produced by Germany Siemens company.
8. Frequency conversion control, total processing time can be adjusted according to the production process
9. Providing heat distribution testing services for users, the use of expert system, online monitoring the temperature change in the process of production.
Model | PLJ-S-4000 | PLJ-S-6000 | PLJ-S-10000 |
Capacity(b/h) | 2000-4000 | 4000-6000 | 8000-10000 |
Bottle inlet temp(℃ ) | 3-5 | ||
Bottle outlet temp(℃ ) | < 45 | ||
Sterilizing temp (℃ ) | 62-85(Can be adjusted as the request) | ||
Sterilizing time | 10min( Can be adjusted as the request ) | ||
Steam pressure | 0.5-0.6MPa saturated steam | ||
Width of belt(m) | 1.22 | 1.5 | 2 |
Circling water(m3/h) | 6.3 | 10 | 20 |
Water consumption(m3/h) | 1 | 1.5 | 2 |
Water pressure≥0.2Mpa Water temp is 20℃ | |||
Steam consumption (kg/h) | 200 | 350 | 600 |
Overall dimension(mm) | 8000×1500×1650 | 8000×1800×1650 | 8000×2200×1650 |
Total weight(kg) | 3800 | 5500 | 7000 |
Service
MODERN MACHINERYoffers engineer to assist you in installing your bottling machine. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.
Our engineer offers the following services:
1. Installation of equipment or packaging line at the customer's plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment's performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures
Filling machine machining center
Container loading and shipping
We supply complete solution of filling and packing line from A to Z, which includs Auto can / bottle depalletizing machine, Can / bottle rinsing device, 2in1 filling and sealing machine, Can wraming tunnel / Beer pasteurization tunnel, Air dryer, Automatic bottle packaging machine, Automatic palletizer system, as well as the complete Water treatment system, Mixing tanks, Water chiller, Beverage carbonator and the whole factory conveyor system.
This Beer Pasteurization Tunnel has 5-7 temperature sections, so temperature difference between section is small. It could assure good sterilizing, effects, reduce bottle broken rate. Hot water is recycled to use in temperature sections in order to save heat energy and reduce water consumption. This tunnel pasteurizer could process bottled beverage or beer products, which completely conforms to relevant technologic requirements.
On request, customized size can be studied to best fit your brewery spaces. All the tunnels are made of 304 stainless steel. Inside the pasteurizer, the bottles / cans are moved along the line, encountering the upper showers that spray them with heated water at different temperatures, until reaching the exit. The speed of the machine can be set and controlled from an electrical panel.
Performance characteristics:
1. Equipment rack is full stainless steel, the overall structure is compact, and health appearance.
2. High quality stainless steel mesh belt chain plate, can be long-term work under the high temperature of 100 ℃.
3. Solid cone wide-angle spray nozzle, the flow distribution uniformly stable, constant temperature field.
4. A variety of comprehensive utilization of heat energy recovery technology, energy saving, environmental protection.
5. Pt100 temperature sensor, measurement accuracy is high, up to + / - 0.5 ℃.
6. The combined process, reasonable process, can handle a variety of materials.
7. Sterilization temperature PLC touch screen control was produced by Germany Siemens company.
8. Frequency conversion control, total processing time can be adjusted according to the production process
9. Providing heat distribution testing services for users, the use of expert system, online monitoring the temperature change in the process of production.
Model | PLJ-S-4000 | PLJ-S-6000 | PLJ-S-10000 |
Capacity(b/h) | 2000-4000 | 4000-6000 | 8000-10000 |
Bottle inlet temp(℃ ) | 3-5 | ||
Bottle outlet temp(℃ ) | < 45 | ||
Sterilizing temp (℃ ) | 62-85(Can be adjusted as the request) | ||
Sterilizing time | 10min( Can be adjusted as the request ) | ||
Steam pressure | 0.5-0.6MPa saturated steam | ||
Width of belt(m) | 1.22 | 1.5 | 2 |
Circling water(m3/h) | 6.3 | 10 | 20 |
Water consumption(m3/h) | 1 | 1.5 | 2 |
Water pressure≥0.2Mpa Water temp is 20℃ | |||
Steam consumption (kg/h) | 200 | 350 | 600 |
Overall dimension(mm) | 8000×1500×1650 | 8000×1800×1650 | 8000×2200×1650 |
Total weight(kg) | 3800 | 5500 | 7000 |
Service
MODERN MACHINERYoffers engineer to assist you in installing your bottling machine. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.
Our engineer offers the following services:
1. Installation of equipment or packaging line at the customer's plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment's performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures
Filling machine machining center
Container loading and shipping