Product Category

15000BPH PET Bottle Soft Drink Filling Machine

Model: XGFD

Complete PET Bottle Carbonated Soft Drink Filling Line

Carbonated soft drink filling line layout

PET Bottle Bottle Soft Drink Filling Machine

The series of Carbonated Soft Drink Filling Machine for filling carbonated soft drink contains washing, filling and capping with complete automation, suitable for filling carbonated water drink into polyester bottles and PET bottle. Carbonated water machine, soda machine can be used for all kinds of  PET bottles. The bottle neck blocking makes the process of changing bottles easily by only adjusting the height of conveyor chain. The filling process adopts the micro-pressure technology,which makes filling process faster and more stable.

Just check out the whole list of hi-tech carbonated soft drink filling machine at MODERN, You can find each kind of beverage machinery that you want here!

Soft drink filling machine

1. The air feeding device is used for the PET bottle / Glass bottle, and the bottle neck bottle is adopted. The bottle speed is fast and the bottle is not deformed;
2. This machine uses the advanced card bottle neck technology to avoid contact with the threaded mouth, which is more sanitary. The bottle is transported using the bottle neck technology. The bottle shape does not need to be adjusted, just change the diameter of the bottle. Guard plate;
3. Filling adopts valve lifting technology, and the filling valve adopts the new micro-pressure filling principle, which is accurate and accurate;
4. The screw cap adopts the cap screwing technology introduced by France, and the capper is selected to be installed at a low position and fed horizontally;
5. The machine is compact in structure, complete in control system, convenient in operation and high in automation.

Carbonated Soft Drink Bottle Filling Principle

Carbonated drink Bottle Filling Principle

Bottle Rinsing Part:

The rotary wheel is a fully SUS304 stainless steel welded structure.
The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS304 stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine frame via gear transmission.

Soft drink filling machine (2)
Soft drink filling machine (4)

Bottle Filling part:

Rotary wheel fully made of stainless steel SUS 304.
Isobaric filling method.
Filling valves are made of SUS304.
Filling valves are reasonably structured with accurate filling.
Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.
Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.

Bottle Capping part:

Sealing faucet (main part to control the credibility of sealing), is improved by experts with the design of alnico.
Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism. Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute. The capper is equipped with inlet bottle detection switch. Centrifugal way of cap arranging is adopted to reduce damage of caps.
A cap inspecting system is applied to control on-off of elevator.


Soft drink filling machine (3)
 Heads  of
washing  filling
 Motor  power
 Overall dimension
 2.2+0.55 +0.12
 2.2+0.55 +0.18
 3+0.55 +0.18
 5.5+0.55 +0.18


MODERN MACHINERYoffers engineer to assist you in installing your bottling machine. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.
Our engineer offers the following services:
1. Installation of equipment or packaging line at the customer’s plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment’s performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures

Filling machine machining center

Related Product