Product Category

10000BPH Fruit Juice Bottling Machine

Model: XGFR

Complete Fruit Juice Bottling Line

Fruit juice bottling Line is a unique PET packaging solution offering a great alternative for hot-filled beverages in PET bottles. It expands the opportunities of product premiumisation and revenue generation with no compromise on packaging performance and the consumer experience. This innovative solution is addressing the single serve market of hot filling in PET bottles up to 2L at a temperature of 85-88°C.

Juice bottling line layout

3 in 1 Juice Bottling Machine

This 3in1  juice bottling machine can achieve the replacement of different bottles only by exchanging equivalent parts. This system can also form complete set of production line with other related systems, providing proposals for full-set of fruit juice bottling and packing equipment. Cap Overturn sterilizer, bottle cooling tunnel, air dryer, shrink sleeve labeling machine and PE packing machine, which connect with hot juice filling machine, it constitute a complete fruit juice production line.

Satisfying different customers’ different requirements about the production capacity: from 2000-30000b/h, mango juice filling, pineapple juice filling, orange juice filling and other type hot filling process for juice etc.

Juice bottling machine

Juice bottling machine rinsing part

Juice Bottle Rinsing Part:

The rotary wheel is a fully SUS304 stainless steel welded structure.

The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS304 stainless steel, this bottle clamp is hygienic and durable.

The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.

All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.

The rinser is driven by driving system positioned inside machine frame via gear transmission.

Juice Bottle Filling part:

Rotary wheel fully made of stainless steel SUS 304.

Negative pressure filling method.

Filling valves are made of SUS304.

Filling valves are reasonably structured with accurate filling.

Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.

Filler is driven through gears inside the machine frame.

Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.

Juice bottling machine filling part
Juice bottling machine capping part

Bottle Capping part:

Sealing faucet (main part to control the credibility of sealing), is improved by experts with the design of alnico.

Besides the magnetic contortion variation device, there is variation dial which makes variation more easily. The benefit of this design is not only it can set the contortion, but also it makes contortion more precise and credible, and reduces inferior.Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out

mechanism. Cap distributing chute is equipped with a photocell switch to stop the capper when there is

no cap inside the chute.The capper is equipped with inlet bottle detection switch. Centrifugal way of cap arranging is adopted to reduce damage of caps.

A cap inspecting system is applied to control on-off of elevator.

Model
 Heads of washing,
filling, sealing
 Production
capacity(bottle/
hour)
 Suitable bottle
height
 Spraying
pressure
 Total Power
 Outer Dimension
(mm)
 Weight
 XGFR16126
 16-12-6
 3000-4000
H=170-320
0.25-0.3
 1.5+0.37
 2300×1680×265
 2600
 XGFR18186
18-18-6
 5000-7000
Φ=50-100
330 ~ 1500ml)
 2.2+0.37
 2500×1760×2650
 3500
 XGFR24248
2 4-24-8
 8000-12000
 3+0.45+0.25
 3100×2100×2650
 4650
 XGFR32328
 32-32-8
 12000-15000
 5.5
 3800×2800×2650
 6800
 XGFR404010
 40-40-10
16000-18000
 7.5
 4000×3300×3400
 8500
 XGFR484812
 48-48-12
 20000-24000
 11
 4850×3650×3300
 1000
 XGFR606015
 60-60-15
 24000-28000
 15
 6500×5400×3500
 12500

 

Service

MODERN MACHINERY offers engineer to assist you in installing your bottling machine. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.

Our engineer offers the following services:
1. Installation of equipment or packaging line at the customer’s plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment’s performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures

Juice bottling line installation and training

Filling machine machining center

Juice bottling machine manufacturer

Container loading and shipping

Juice bottling machine Container loading and shipping

Related Product